Our Reproduction boots and shoes are made from top grain leather with the rough side out (unless otherwise specified) for greater durability. Styles include shoes and boots from the late 1700's through the 1800's and into the 1900s.

    Some of the shoes and, such as the Stacy Adams and Oak Tree Farms, are NOT reproduction. They are what could be call retro, as they are modern made shoes that look like those of the earlier period. In most cases the differenced is minor.

    According to Quartermaster records, most shoes and boots purchased had sewn soles. The pegged sole booties were purchased for $1.25 and $1.30 per pair as opposed to the average of about $1.90 for sewn soles, but the sewn soles were preferred.

    These ship from Florida. Normal delivery time is 5 to 10 days, IF your size is out of stock they will normally take 2 to 6 weeks.

    As you can tell it is almost a straight last, but it is a left/right. That means that the arch in the boot will make it comfortable for walking as for riding. A steel shank will give a long life to this fine boot.

    The leg has been widened so you can wear these boots outside of your trousers. The leg height is 17", proportioned to the size. It is lined with calf skin, has pull tabs (not mule ears) on the outside of the top. The toe is a moderate square and the heel is 1 1/4". The top of the boot is about 12" from the ground, depending on the size. The leather is black and smooth but not a high shine. It has a full lining.

    This boot should be good for drovers, prospectors and shooters (before the cowboy boots).

    Be sure to have your calf measurement when ordering. The circumference of the boot varies with size and will fit most men.  It can be stretched to accommodate larger calves.

    These ship from Florida. Normal delivery time is 5 to 10 days, IF your size is out of stock they will normally take 2 to 6 weeks.

Repro (size 9½), Original (size 5)

    This boot was originally called the M1851 Artillery Driver's Boot, as it was originally only issued to Artillery Drivers. During the American Civil War they were also issued to Cavalry troops and continued as the Cavalry Boot until replaced by the Model 1872 Boot, which is a modified version of this boot.

    This boot is an exact copy, with the exception of two changes. The originals had been machine pegged, nine pegs to the inch. Ours is stitched due to the lack of machine that can duplicate the work of an 1860's pegging machine. And for comfort the boot is lined with calfskin leather from top to toe. The leather in our boot is a semi-rough cowhide especially selected after studying the original boot. They will take a shine after a few polishes or will take Lexol for a "field-worn" look. They have a sewn sole with a ridged shank pegged into place. This boot has a comfortable square toe and a tight-gripping heel. There are no side seam welts.

    This boot covers an amazing time period. It is ideal for many impressions from just after 1800 through 1900 and beyond. It is suitable for 1800's miners, teamsters, cattlemen, farmers, Indian Wars, Cowboy Shooters, etc.. Mail order catalogues printed in the 1890s show a wide assortment of prices and qualities in styles just like these.

    According to Quartermaster records, most shoes and boots purchased had sewn soles. The pegged sole booties were purchased for $1.25 and $1.30 per pair as opposed to the average of about $1.90 for sewn soles, but the sewn soles were preferred.

    These ship from Florida. Normal delivery time is 5 to 10 days, IF your size is out of stock they will normally take 2 to 6 weeks.

    Nail-On Heel Plates are available in two sizes of one style and one size of another style.

    Screw-On Heel Plates come in one size only. They are copies of a pair found on the Corinth Battlefield.

    None of these will work on the Cuban or Cowboy Heels, as they are all too large including the small size.

Nail-On Standard 2 15/16"w X 2 7/8"l

Nail-On Small 2 5/8"w X 2 3/4"l

Screw-On Standard 3 3/16"w X 2 7/8"l

Heel Plates shown installed